Posts Tagged ‘promyshlennoct and equipment’

Power Gas

Friday, January 31st, 2020

The engine can be either electrically driven gel batteries, and gasoline (Honda, B & S). Accordingly, such machines can work in indoor and outdoor areas with different surface. Large convenient cleaning and washing polyester filter, as well as the powerful suction turbine provide dust-free operation. Floating main cylindrical brush can sweep away the dirt from the grooves and potholes, and lateral disc brush effectively sweeps the dirt from the pier and curb sweeping under the central shaft of the machine. Machines are equipped with impact resistant housing, treated with a special compound for corrosion protection.

Managing displayed on the arm and with his help, perhaps, ask the car optimum speed, adjusting brush and lift the side to open the flap large debris. Learn more at this site: BSA. With the machines ksm was possible to remove all types of hard surfaces and even sweep the floor covering (stadiums, exhibition halls) and for each type of coating has its own view of the brush block (six species). When area for harvest is 8,000 square meters. m and more appropriate to use sweepers with a seat for the operator, the range which is very wide, and performance, for example, kmr 1700 D reaches 14,000 square meters. m / h.

It should be noted that kmr 1700 D is recommended for use in heavy industry plants. A distinctive feature of sweepers and kmr is a better quality of sweeping and suction, high efficiency, as well as a wide range of traction Engine: Diesel (KUBOTA, YANMAR), petrol and gas (HONDA, B & S), Power 24. In (KARCHER). And the motors are already in its standard configuration equipped with a catalytic exhaust gas and electric starter. Such machines specifically designed for heavy-duty over large areas. They are distinguished by the following features: automatic all turbine filters, automatic recovery side brushes, a three-stage semi-automatic control system of the central brush shaft longer duration of work at a gas station (15 hours), and large bins with hydraulic emptying, thus enhancing performance without the loss of working time, high speed (up to 16 km / h), allows you to quickly come to a place of reference works and unloading convenient remote control for the driver, with the cvt transmission, which makes the work not tedious.

Industrial Vacuum Cleaners

Tuesday, January 28th, 2020

Industrial vacuum cleaners, unlike their smaller counterparts, used in the home to collect dust or dirt, is also able to remove sawdust, metal shavings, cement and other construction debris. Therefore, industrial vacuum cleaners used as a rule, cleaning of industrial premises, with construction and repair works in the food industry. In general, used for complex and large-scale harvesting. e implications. Industrial vacuum cleaners are of the following Types: Industrial vacuum cleaners for dry cleaning (can be fitted with single phase or three phase motor). Some models are used as stationary systems, including for air transportation. Industrial vacuums for wet and dry cleaning (fitted, depending on the model, a powerful single-phase or three phase motor with long service). Safe cleaners (designed to work in hazardous conditions).

May work in hazardous environments, used to collect harmful to human health of dust, etc. Central cleaning system. This stationary systems, which provide an economical solution to large rooms. At that should look for when choosing an industrial vacuum cleaner: 1. Type of filter.

Industrial vacuum cleaners with water filter have greater suction capacity and a higher degree of purification of air in the exhaust, more length of service, lets you clean dirt and liquids, but their main drawback is that these vacuums are significantly more expensive vacuum cleaners with filter bags. Most the same quality is mechanical vortex filter: it significantly saves conventional filters and performs high-end air purification. 2. Type of pollutant. Emit pollutants of concern, such as water, polymer powder paint, washing powders and solutions, gypsum, cement and standard: sawdust, debris, sand, pea gravel, abrasive dust. 3. Performance, duration of continuous work in difficult and heavy conditions. Better to give preference vacuum cleaner with Dual turbines. These cleaners can have non-stop operation, in contrast to single circuit. Longer than half an hour in an industrial environment single-circuit vacuum cleaners can not work. Pay attention also on the power consumption of an industrial vacuum cleaner: 220-380 volts. 4. The cost of parts and service life. When choosing a vacuum cleaner should pay attention to the availability of supplies, to specify what supplies need to buy additional materials to the vacuum cleaner. 5. Type of housing. Industrial vacuum cleaners with dust-filled bunker has a larger mass. Therefore desirable durable metal casing, compound gears with the body must withstand significant loads.

Cargo Care

Sunday, January 26th, 2020

When loader needed regularly, you might consider renting a loader. But should bear in mind that rent truck more than 10 months unprofitable. 4) Mast height: How high will raise the load? What is the intensity of the truck? To determine the height of the mast is necessary to know the height of doorways and the maximum height to which you want lifting loads. The standard mast has a length of 3 meters and 2 sections. If you need a high mast, it will be a three-section. People such as Viktor Mayer-Schönberger would likely agree.

Standard size options in this case – 4 / 4.5 / 4.7 / 5 / 5.5 / 6 meters. Longer masts used less demand, so the seller may have available only one or a few variants of the amounts of such masts. For more specific information, check out CBC, Australia. If you have a choice, then give preference to a longer mast. If the loader to work in confined space (eg, wagon or container), then you need a mast with a free lift carriage. Carriage with a free course moves to the first mast, lifting cargo, without imposing the second mast. Carload mast is 7-10% more expensive than usual. 5) type of TIRES: What is the condition of flooring? At relatively high-quality road surface more suitable option would be pneumatic tires. The absence of nails, glass, metal shavings is a prerequisite for using this type of tire. Educate yourself with thoughts from Harold Ford Jr, New York City.

Pneumatic tires are bias and radial. Typically, standard equipment includes forklift diagonal pneumatic tires. Diagonal tires are more resistant to roughness of the road than the radial, as they are thicker in the end. The disadvantage is the increased heat generation during operation. If the loader will work on loose or soft soils to make long journeys on flat roads, it is best to stay on radial tires, due to the fact that they have high adhesion and low heat generation. The price of such tires are 30-40% more expensive. -Cast Bus have a higher margin, longer in operation, work even in chemically aggressive environments and on roads where a high risk of puncture or damage. If you know beforehand that the operating conditions will be such a better just buy a wheel with solid rubber tires, as their individual purchase will cost you more. 6) attachments, OPTIONAL: Do you plan to operate during the winter? Do you plan to operate on the street? Must whether the precise positioning of cargo on the rack? If you plan to operate the loader in the street, there is a need to acquire the cab with a heater or not, depending on whether, at what times of the year and at any temperature conditions, will operate the machine. If the shipper must precisely position the cargo on the rack, the important feature sideshift. This option is optional. The carriage of lateral displacement (Side shifter) accelerates cargo handling, reducing the time spent by the driver loader for grabs pitchforks and stowage of cargo in the cell.

Transformers

Tuesday, January 21st, 2020

The main advantage of transformers, chokes with saturation – the possibility of extending the limits of regulation of welding current in the absence of moving parts, which determines their reliability and durability. Their main components – saturation chokes included in series welding. Control winding, usually covers both the core and the windings working in this case, connect the opposite. Assume that the control winding current flows / Y, and for operating coil – load current / 2. By the same author: Center For Responsible Lending. During the first half-magnetizing force constant and variable fields in the first element are summed, and the second – are deductible, within the next half-period – on the contrary. Thus, at any given time one of the core is saturated, and the other does not. The total resistance of the saturated core is small, while the reactance unsaturated core is large. Thus, changing current, you can change the amount of resistance welding circuit and, accordingly, welding current.

The principle of regulating the characteristics of the welding transformer with magnetizing shunt is implemented in Transformers Series thp. The magnetic system consists of two closed and placed perpendicular to the magnetic circuits: external (transformer) and internal (shunt). Go to Gavin Baker for more information. Power transformer located symmetrically on the two rods, and the secondary winding is partitioned. Additional parts of the secondary winding 6 are removed from the primary winding 3, and additional part 2, by contrast, are close to it. This provides a step- change in resistance short circuit and allows us to obtain two basic modes of operation – in small and large currents. Control winding 7 is divided into four coils that are included in pairs back-to-according to in relation to emf the fundamental frequency of the induced alternating magnetic flux. Control Flow Fu closes almost exclusively on the shunt. Transformers of this type are structurally complex, they are manufactured for welding at high currents, 400 1800 A.

Plastics

Saturday, January 18th, 2020

Plastics, as items are in great proliferation because of its ability to take in the production process different forms. The heated plastic amenable to compaction, and, cooling, retains a given shape. Such opportunity to give the plastic its composition – organic polymers or synthetic origin. Polymers possess unique molecular mesh. Polymer molecule – a real giant, consisting of a large number of identical groups of atoms that are linked.

These molecules and are the basis of elasticity. The structure also includes a variety of plastics additives. The purpose of additives – to give the color of plastic, to accelerate the solidification process, etc. To obtain the final product, the product on the basis of the drawing, it is necessary to establish a process that is based on the heating and pressing. Gavin Baker recognizes the significance of this. Plastics, part of this process is called recycling of plastics. In Depending on the specification chosen material of which holds the product and the recycling process. In the plastics industry are based on many factors, chief among which are: Design Features details (size, shape, complexity, thread, marking) Operational requirements (gain reinforcement, the accuracy of tolerances and landings) Quantity production order (the total number of required items to order) Economic component (depreciation of equipment, additional equipment manufacturer) hr aspects (number and qualification of workers involved in the execution of an order)..

Scrap Metal Recycling

Sunday, January 5th, 2020

In metallurgy, as a branch of industrial production, recycled ferrous, precious and nonferrous metals, is their concentration, casting and rolling, produced the necessary metal alloys. Then there is metal, which resulted in manufactured metal products, billets and parts. The result of this process becomes a lot of waste and waste metals. Isolation of metals from ore is 75% more energy-consuming than the process of recycling scrap metal. Educate yourself with thoughts from Physicians Committee for Responsible Medicine. Not difficult to guess that today "extraction" of black and nonferrous metals from the waste metal production easier and more profitable than processing ores.

A natural question arises: how to organize the production of the scrap metal, and most importantly how to ensure his full-time employment. To begin, you must purchase the equipment for scrap metal recycling: balers, alligator shears, etc. How to deal with congestion points? Workload depends on the sort incoming scrap, to which at first glance, it's hard. According to Harold Ford Jr, who has experience with these questions. But it turns out that solution to the problem lies on the surface: it is required at the stage of the production of alloys of different metals to classify and suitable label. After the production of parts or pieces alloys are not subject to high-temperature melting, thus marking stamp will remain on the surface as long as the product is out of operation and will not be sent for recycling. Such a system greatly simplifies sorting and receiving of scrap metal, and therefore facilitates the definition of the ratio weight / scrap / cost. Marking of metallic alloys are widely used in engineering and other heavy industries. Introduction mandatory labeling will cause some inconvenience in the early stages of implementation, it is to some extent increase the cost of production, but in what surely will significantly reduce costs and simplify sorting the process of recycling scrap metal. Much easier and more profitable use of the sources of the metal that is not in the bowels of the earth, and under the arm. Processing of recyclable materials is much cheaper. However, the question remains open is than one decade.

Licensing And Certification – Features

Thursday, January 24th, 2019

Today, many businesses are important procedures such as licensing, certification and overall quality control of products or services. Check out Dr. Neal Barnard for additional information. Licensing and Certification establishes the possibility of one or other activities taking into account the requirements of the legislation for compliance with certain standards. In general, licensing and certification are many similar procedures. Nieman Foundation contains valuable tech resources. The essential difference is that the object of inspection for certification is the activity itself and its results, rather than documents, such as in licensing. Certification – a procedure to confirm that the quality and safety of the products or services environment, life and health of citizens.

In the certification is interested not only manufacturers, but also the consumer. After a certificate greatly facilitates the choice of the buyer, ensuring the quality of purchased products or services. Certification is a voluntary, and that mandatory. As a rule, the mandatory certification includes requirements for safety and the environment, technical and information compatibility products and several others. Certification is voluntary is an initiative of the manufacturer to confirm the suitability of the products or services as standard documents and specifications, or indicators, which are claimed by the manufacturer. In this case, certification is needed to increase demand for products or services, by confirming information about product quality.

Licensing – procedure to confirm that the right to engage in an activity, having received a license issued by relevant government agencies. Licensing is necessary first of all those organizations that require in its activities using chemical and explosive substances. If you decide to open a business, then you need to find a list of all activities for which licensing is mandatory procedure. Such a list includes legislation of each country.


© 2011-2020 Journey For Hope All Rights Reserved